Sensormatic VM 8 Operator's Manual download pdf (Page 51)

4-6 Operator's Manual

4. Use the Tracker Ball to scroll through the menu selections until Record

Pattern is displayed.

Record Pattern

Alarm Actions

5. Press the appropriate button—zoom or focus—to select Record

Pattern.

The following prompt appears on the LCD:

Cam 3

Enter Patrn#?

Note If you press a number that has already been assigned to a Pattern for this

camera, the new Pattern will overwrite the existing Pattern. There is no

warning to indicate that the existing Pattern will be replaced. Use caution.

6. Press the number on the keypad (1 - 3) that you want to assign to this

Pattern, for example 1.

The following message appears on the LCD:

Record Pattern 1

Finish w <Next>

7. The Pattern is now being recorded in real-time. If you let the camera sit

still at this point, that non-motion time will be recorded in the Pattern.

If you pressed an invalid number (any number greater than 3), the TOUCH

TRACKER will beep and the system will not allow you to program the

Pattern. If this happens, simply press a valid number and continue with

this procedure.

8. Move the camera around and create a logical, usable Pattern. Remember,

the three Patterns for this camera can collectively incorporate up to 98

camera commands, and each Pattern can be up to 6 minutes and 50

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 111 112

No comments

Sensormatic VM 8 Operator's Manual Page 51