Sensormatic VM 8 Operator's Manual download pdf (Page 37)

3-6 Operator's Manual

To flip the currently selected SpeedDome, press the Flip button on the

keypad. When you flip a SpeedDome, the LCD displays the following

message:

Cam x +

Flip Dome

Running the “Apple Peel” Pattern

You can instruct a SpeedDome to run the Apple Peel pattern. This is a default

pattern that all SpeedDomes can run without any user programming.

The Apple Peel pattern consists of three

revolutions of camera panning, with tilt starting at

the ceiling. Each revolution tilts down

approximately 30°. The Apple Peel pattern

provides you with a complete view of the area.

Note If you are using the View Manager 16 Plus system with a Sensornet-to-RS-

422 Code Converter, pressing Peel will run Pattern 3 for the currently

selected dome if Pattern 3 has been programmed.

The following procedure describes how to initiate the Apple Peel pattern.

1. Use the number buttons to enter the number of the SpeedDome for which

you want to initiate the Apple Peel pattern (for example, camera 2). Then

press the Camera button.

2. Press the Peel button.

The LCD displays the following message:

Apple Peel Pattern

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 111 112

No comments

Sensormatic VM 8 Operator's Manual Page 37