Sensormatic VM 8 Operator's Manual download pdf (Page 60)

Defining Automatic System Functions 4-15

• Do you want a Pattern to be displayed when this alarm is

triggered? If so, press the Pattern button, and then use the

number buttons to indicate the specific Pattern (1 - 3).

• Do you want a fixed shot to be displayed when this alarm is

triggered? If so, press the View button, but do not enter any

number in this field. When this alarm is triggered, you will see

video of wherever the camera (that you indicated in Step 6) is

currently pointing.

9. Move the Tracker Ball to the right. In the Out field, indicate the specific

output that initiates when this alarm is triggered. Use the number buttons

to enter the number. Remember, this output must be connected to the

camera you picked in Step 6.

If you do not want an output to initiate, leave this field blank.

10. Choose one of the following:

• Do you want to set up another alarm input for this camera? If

so, use the Tracker Ball to scroll through the available inputs

until the appropriate input appears in the input field. Then repeat

Steps 6 through 8.

• Do you want to set up an alarm for another camera? If so, press

the Next button on the keypad until the appropriate camera

number appears in the Alarm Cam field. Then, repeat Steps 5

through 9.

• Are you finished setting up alarms for now? If so, press the

Menu button. This returns the T

OUCH TRACKER to the camera

control mode.

SpeedDome LT Auto Pan Programming

The Auto Pan is a special feature supported by SpeedDome LT only. It

allows you program a smooth side-to-side camera pan of an area. The

SpeedDome LT does not allow you to program the same types of Patterns

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 111 112

No comments

Sensormatic VM 8 Operator's Manual Page 60