Sensormatic VM 8 Operator's Manual download pdf (Page 27)

2-2 Operator's Manual

Choosing the External Unit for the TOUCH TRACKER

You must assign the correct type of external unit for your TOUCH TRACKER.

It may be a quad splitter, a multiplexer, or a PC. If there is no external unit,

this must be indicated as well.

IMPORTANT

Although the TOUCH TRACKER allows you to select any of the configurations

via this menu, it will only recognize the unit to which it is actually

connected. Make sure you select the configuration that applies to your setup.

If your system is connected to a 16-camera multiplexer, do not select a 9-

camera multiplexer.

To assign the external unit, do the following:

1. Press the Menu button on the Main T

OUCH TRACKER.

The menu appears on the LCD. It looks like this:

Define Sequence

Setup View

2. Use the Tracker Ball to scroll through the selections until “Config

Devices” is displayed on the LCD.

Alarm Actions

Config Devices

3. Press the appropriate button— zoom or focus—to select Config Devices.

Use the following chart to determine your correct configuration.

Device = Quad

= POSEM

Choose this configuration if your

OUCH TRACKER is connected to a

quad splitter, a POS/EM system, or

both

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 111 112

No comments

Sensormatic VM 8 Operator's Manual Page 27