Sensormatic VM 8 Operator's Manual download pdf (Page 59)

4-14 Operator's Manual

In this sample alarm, input 1 on camera 12 is the specific input that will

trigger the alarm. The alarm input, for example, could be a motion

detector that triggers an alarm when it senses motion. When this alarm is

triggered, Quick View 96 on camera 7 appears on the monitor. In

addition, output 3 on the same camera initiates automatically. The output

might be, for example, a light that turns on when the alarm is triggered.

Even though you can only see the information for one alarm input at a

time, each camera can have four alarm inputs.

When the TOUCH TRACKER is in the menu/programming mode, the

Tracker Ball enables you to move the cursor around on the LCD. The

blinking square on the LCD indicates the cursor's location. Move the

Tracker Ball left and right to move the cursor among the fields on the

LCD.

5. When the setup alarm LCD is first displayed, the cursor is in the Cam

field for input 1 of the camera you indicated.

Is this the alarm input that you want to configure? If so, continue with

Step 6 now.

If this is not the alarm input you want to configure, use the Tracker Ball

to scroll through the available inputs until the appropriate input appears

in the input field.

6. In the Cam field, indicate the camera whose Quick View, Pattern, or fixed

shot appears when this alarm is triggered. This is the same camera whose

output initiates when the alarm is triggered. Use the number buttons on

the keypad to enter the camera number.

7. Move the Tracker Ball to the right move the cursor to the next field.

8. Choose one of the following:

• Do you want a Quick View to be displayed when this alarm is

triggered? If so, use the number buttons to indicate the specific

Quick View (1 - 96).

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 111 112

No comments

Sensormatic VM 8 Operator's Manual Page 59